Hustonville KY 40437
MORSE RACK AND PINION AND ROTARY REPLACEMENT CABLES.
If you have 300619 marked on your RACKcable or you have 304411 or 304415 on your ROTARY cable, we have the replacement for them below.
ALL PRICES HAVE BEEN REDUCED!
SSC13009 $184.19 SSC13010 $170.59 SSC13011 $175.39
SSC13012 $180.09 SSC13013 $184.89 SSC13014 $189.69
SSC13015 $194.49 SSC13016 $199.29 SSC13017 $203.99
SSC13018 $208.79 SSC13020 $218.29
RACK AND PINION replacement steering cables
We carry Morse rack and pinion steering cables that replace the Morse cable number 300619. Any other number is no longer available in which case you will have to replace the complete steering system which includes the cable, steering helm and steering dress bezel. Please look on the cable you have for the Morse number and the total length in inches. This information should be on the casing of the cable closer to the rod end near the engine. Morse marked their cables in inches: example 144 in = 12 foot cable, 168 in = 14 foot cable. We carry replacements for the rack and pinion systems from 9 foot to 20 foot and replacements for the rotary cables from 8 foot to 34 foot.
Please note: There are no replacement helms for the Morse rack and pinion steering systems. If you choose to replace the whole steering system, you might check out our Teleflex rack and pinion steering systems at this link.
All rotary Morse replacement cables are $135.00 each For the 8 ft to 20 ft cables
22 foot - $208.49 28 foot - $250.59
24 foot - $222.49 30 foot - $264.59
26 foot - $236.59 34 foot - $320.79
.Teleflex steering cable nut kit #SA27620P for $21.00
MORSE ROTARY replacement steering cables $135.00 each
These Teleflex cables will replace the Morse rotary steering cables with either of these numbers on the cable. They are $135.00 each. Look on the cable casing near the rod end for one of these numbers. 304411 and 304415. After that number will be the length written in inches. (144 in., 156 in., etc. )
PLEASE NOTE: If you have a threaded end at the helm on your existing cable you will need the nut kit #SA27620P see below.
If it has a clamp connection with a bolt to hold the cable in place, you do not need the nut kit. See picture of the nut below and the price.